The SolidWorks 3-D models can be viewed in the SolidWorks application or in a free viewer, such as eDrawings (www.edrawingsviewer.com).

No, Logic's Windows CE BSP supports a subset of the hardware functionality provided by the SOM. Please contact product.sales@logicpd.com for a specific listing.

Logic provides a support infrastructure to assist customers in evaluating our products.
Avenues for evaluation support include...

Schematics and PCB layout files are available in PDF format for SOMs and baseboards when the product has been registered on Logic's website.

Orcad schematics and layout files are only available for the baseboards.

A "custom BSP" is a BSP that Logic develops for a customer's specific needs. Logic does not support a custom BSP as a standard product. Custom BSPs are developed under contract with the customer.

BoLo: Block zero loader - The lowest level bootloader or bootstrap code on the system. BoLo was incorporated into LogicLoader code after LoLo version 1.4.0 and...

Microsoft charges their own royalty for Windows CE functionality that can change from release to release, so we do not include this in the cost of the SOM. Another reason we do not include it is because it would create multiple costs for the SOM depending on what software is installed.

Most of the processor signals are available on the SOM's expansion connector(s). Please refer to the specific SOM Hardware Specification manual for a complete reference.

Logic developers are actively using the Abatron BDI 2000 to work with ARM, XScale, and ColdFire based hardware.

No, the SOM does not have ESD protection.

The reason for this is that the SOM was designed to be low cost and adaptable to many different applications, which makes it impractical to design in ESD protection....

There is a maximum size of 1Kbytes (1024 bytes) for the boot string for Windows CE. This size includes the terminating NULL character,  so you really only have room for 1023 characters plus the NULL character.

Yes, our model numbers contain encoded information. Please refer to White Paper 293: Model Number Explanation & Decoder for specific information on Logic's Model Numbering scheme.

You will need to go to Cygwin's website and click the "Install or Update Now" link on the front page. A direct link to this is http://cygwin.com/setup.exe....

To skip any autoboot commands stored in the serial eeprom and boot LogicLoader normally:

1. Open your TeraTerm window
2. Hold down the 'q' key
3. Power on your kit

In order to gain access to Logic's Windows CE Binary BSP Components you will need to download and sign the BSP License agreement first. Logic provides the BSP free of charge for customers that are planning on designing the SOM into their final product. After Logic has recieved the signed license agreement you may be authorized...

Yes, Logic has a small sample application that can be built for both RAM and flash memory.  You can find it under the Sample Application category on the product downloads page.

LogicLoader requires a CompactFlash card to be formatted with a primary partition. Formatting the card from within Windows CE may create an extended partition, thereby making the card unrecognizable to LogicLoader....

The White Paper Model Number Explanation & Decoder explains how to identify your product by part number, serial number, and model number.

• WP 293 Model Number Explanation & Decoder

Logic does not have an off-the-shelf Bluetooth driver available. Logic has software design services that would be able to work with you for a solution in Windows CE 5.0 if you are interested in custom...

A memory map is available as part of the LogicLoader User Manual Addendum that is written for each SOM. Because the memory map is software-dependent...

No, LogicLoader does not support RLE encoded bitmaps. Only uncompressed bitmap formats are supported.

No. For ARM 11 and later cores, the RealviewICE and RVDS development suite is required. An Abatron BDI 2000 is also compatible.

The Windows CE Run-time License Assessment Tool is designed to assist embedded developers in determining which run-time license applies to the custom operating system image they created using Windows CE 5.0. You can find this tool...

The i.MX31 LITEKIT excludes the series resistors on the DDR interface for these reasons....

The release of LogicLoader 2.3.1 did not include display modes for Logic's 12.1" display kits. To see the supported modes, type....

The actual size of NAND will vary depending on the SOM that you have, please check the size and available blocks before erasing.

To add a NAND YAFFS partition to you SOM, use the following LogicLoader commands:...

The latest version of LogicLoader is always marked by (current) on the downloads page. To see all available versions, click on the (+) next to the file name. The version marked (current) is the latest LogicLoader release for your SOM.

The build.sh file must use Unix end of line terminations. Change the line endings to Unix by using "dos2unix" preceeding the build.sh command. For example...

The images we provide on the web do not properly display Windows dialog boxes for landscape and widescreen PSP-style 480x272 resolution displays. The web images use...

The current WinCE 5.0 SOM Base BSP defaults to 64MB of total RAM. Future releases of the kernel component will auto-detect the extra chunk of 64MB of RAM. Until that time, you can follow these instructions to access the extra RAM....

The i.MX31-10 SOM-LV has the following Windows CE BSP Components currently available....

The most recent version of LogicLoader 2.4.0p1 should be used for all Pilot and Production level hardware, as listed in i.MX31 SOM-LV PCN. This essentially means that you should use LogicLoader 2.4.0p1 if your i.MX31 SOM-LV...

The i.MX27 and i.MX31 LITEKITs use the USB On-the-Go (OTG) port for ActiveSync connection. Double check the Connection Diagram in the i.MX LITEKIT QuickStart Guide to make sure the cable is connected to the USB OTG mini-AB port.