Logic

No, Logic's Windows CE BSP supports a subset of the hardware functionality provided by the SOM. Please contact product.sales@logicpd.com for a specific listing.

All Card Engines are designed to be interchangable on all Zoom Starter Development Kit (SDK) baseboards with the exception of the NXP LH79524 Card Engine and Freescale MCF5329/MCF5373 Fire Engines which require different versions of the SDK baseboard.

Logic provides a support infrastructure to assist customers in evaluating our products.
Avenues for evaluation support include...

Schematics and PCB layout files are available in PDF format for SOMs and baseboards when the product has been registered on Logic's website.

Orcad schematics and layout files are only available for the baseboards.

A "custom BSP" is a BSP that Logic develops for a customer's specific needs. Logic does not support a custom BSP as a standard product. Custom BSPs are developed under contract with the customer.

BoLo: Block zero loader - The lowest level bootloader or bootstrap code on the system. BoLo was incorporated into LogicLoader code after LoLo version 1.4.0 and...

The ELF loader needs to know the address in memory where it should place the incoming binary file. The Greenhill and ARM tools place this information at the very end of an ELF file. When downloading over a non-random access device....

Two touch screen calibration registry entries are designed to improve LCD touch screen tap sensivity....

The bridged Ethernet connection (NE2000 compatible) does not support fragmentation of packets. Any Ethernet packet containing more than one TCP/IP packet data allowance will not be transmitted correctly. This may be exhibited...

Microsoft charges their own royalty for Windows CE functionality that can change from release to release, so we do not include this in the cost of the SOM. Another reason we do not include it is because it would create multiple costs for the SOM depending on what software is installed.

The LoCE Binary BSP allows the customer all of the flexibility of full source code builds without the hassle of actually having to maintain the source code. The LoCE Binary BSP allows for custom OS designs and software development.

Most of the processor signals are available on the SOM's expansion connector(s). Please refer to the specific SOM Hardware Specification manual for a complete reference.

Yes, the Card Engine connector consists of a 144-pin SODIMM (widely used as laptop memory connectors) and two high-density 80-pin Hirose connectors (widely used in cell phone applications). Logic has leveraged...

Logic has created a standard pin-out design across all Card Engines which is non-proprietary.

The expansion connector pinout is the same, but depending on the specific Card Engine functionality, some peripheral functions may or may not be available or connected. Common peripherals are...

GNU cross development tools for ARM, SH3, SH4 and ColdFire are provided.

LogicLoader supports downloads from serial, TFTP, CompactFlash card, Ethernet, and loading from Microsoft Platform Builder.

Logic developers are actively using the Abatron BDI 2000 to work with ARM, XScale, and ColdFire based hardware.

No, the SOM does not have ESD protection.

The reason for this is that the SOM was designed to be low cost and adaptable to many different applications, which makes it impractical to design in ESD protection....

No, they are mutually exclusive. If you need to use Ethernet and KITL it is reccomended that you add Ethernet at the end so you can develop using KITL.

In the serial EEPROM is where you need to store your script. To have LoLo automatically start this script, "name" it "LOLO" or "VOLO". If the first four bytes in the serial EEPROM are "LOLO" or "VOLO", the LogicLoader software will grab everything after it...

There is a maximum size of 1Kbytes (1024 bytes) for the boot string for Windows CE. This size includes the terminating NULL character,  so you really only have room for 1023 characters plus the NULL character.

The Logic LH7A400 PCMCIA driver does not auto-configure itself for timing. Try to slow down the timing specifications in the .REG file for the PCMCIA driver. Complete timing information can be found...

The way to import a driver into your Platform Builder catalog is as follows:...

There are two ways to create a raw binary using Platform Builder:

1. Modify the config.bib file to generate a .nb0 file.
   Here are the lines to add....

A likely cause of this problem is that your PC has its MTU (Maximum Transmission Unit) size set to less than 1500. Many VPN and other network services set the network connection's MTU to optimize the efficiency of the network traffic. Most set the MTU to...

You have to include a stub keyboard driver e.g. NOP (Stub) Keyboard/Mouse English and add the necessary .reg entries to assign a layout. The .reg entries that should be added are shown below....

You may have installed the LoCE base BSP component AFTER the kernel component. Doing this removes some DIRS file lines that are required to build...

I am compiling a MFC app for CE 5.0 using eVC 4.0 SP4 and get the following:

corelibc.lib(pegwmain.obj) : warning LNK4209: debugging information corrupt;
recompile module; linking object as if no debug info

This happens because CE 5.0 SDK libraries were built with newer tools than...

LogicLoader API is supported in versions 1.4.x and later.  If you have an LH79520 or LH75401 Card Engine, API functions will not be available....

1. Burn your Windows CE image to flash
2. Reset your SDK
3. At the losh> prompt run: ifconfig sm0 dhcp...

The table below lists some CompactFlash memory cards that have been successfully tested with the NXP LH7A40x Card Engines...

Three Wi-Fi cards have been tested and verified on Logic NXP, Renesas, and Marvel SDKs under Windows CE. These three are....

This error is given because your image size is bigger than the allowed size contained in the XXXXX_XX_config_bib.h file. The specific file for your Card Engine can be found at the following path....

1. Open up Adobe Photoshop (or Photoshop CS) and load the original bitmap image intended for use as a splash screen image
2. Flip the image upside down by choosing Image > Rotate Canvas > Flip Canvas Vertical....

Yes, our model numbers contain encoded information. Please refer to White Paper 293: Model Number Explanation & Decoder for specific information on Logic's Model Numbering scheme.

1. In LogicLoader ( version 1.4.x or later) type 'update' at the losh> prompt
2. Go to "Send File" in TeraTerm
3. Select the .upd file that you want...

You can gain access to the Technical Discussion Group by clicking on the "Register" link at the following URL and filling in the necessary information: http://tdg.logicpd.com/

The default behavior of the LoCE BSP is to build Windows CE images which are linked to be downloaded and run directly from the Card Engine's RAM. Users may also choose to build images, which are linked to be downloaded, stored, and run from the Card Engine's flash memory....

You will need to go to Cygwin's website and click the "Install or Update Now" link on the front page. A direct link to this is http://cygwin.com/setup.exe....

Yes, there is a White Paper posted on the downloads page entitled White Paper 246: LH7A400-10 GPIO Usage. While this was originally created for the LH7A400 Card Engine, this paper is also useful for the LH7A404 Card Engine....

Yes there is an application note available called Restoring a Corrupt Bolo/Lolo with an ARM Multi-ICE. It details a step-by-step process for restoring LogicLoader to the SOM with an ARM Multi-ICE JTAG....

In order to gain access to Logic's Windows CE Binary BSP Components you will need to download and sign the BSP License agreement first. Logic provides the BSP free of charge for customers that are planning on designing the SOM into their final product. After Logic has recieved the signed license agreement you may be authorized...

All of Logic's Sample NK.BINs use HIVE to store the registry on the CompactFlash card on the SDK. If a CompactFlash card is not present in the slot on the SDK the image will not boot....

Yes, Logic has a small sample application that can be built for both RAM and flash memory.  You can find it under the Sample Application category on the product downloads page.

LogicLoader requires a CompactFlash card to be formatted with a primary partition. Formatting the card from within Windows CE may create an extended partition, thereby making the card unrecognizable to LogicLoader....

If you do not have the parameter "kitl:true" in your Windows CE bootstring you will be unable to connect over Activesync in Microsoft Visual Studio (kernel versions 2.1.7.1 and earlier)....

Logic does not have an off-the-shelf Bluetooth driver available. Logic has software design services that would be able to work with you for a solution in Windows CE 5.0 if you are interested in custom...

The CompactFlash slot on the Zoom SDK is memory-mode only and is not hot swappable.

A memory map is available as part of the LogicLoader User Manual Addendum that is written for each SOM. Because the memory map is software-dependent...

Zoom SDK baseboard design files are available on the website. You'll need to register your kit in order to access them....

The Sample Foo Driver should help in working with GPIO; the driver is available on the specific SOM's download page.

No, LogicLoader does not support RLE encoded bitmaps. Only uncompressed bitmap formats are supported.

IAR has added support that is specific to a variety of Logic's NXP Zoom SDKs.  For a listing of supported products please refer to the following link:

http://www.iar.se/index.php?show=4082_ENG&reflogin=4082_ENG

Make sure the BDI2000 has the right firmware.  The BDI2000 will display what CPU platform it is programmed for when you telnet to the BDI2000.  It may scroll off your telnet screen...

The Windows CE Run-time License Assessment Tool is designed to assist embedded developers in determining which run-time license applies to the custom operating system image they created using Windows CE 5.0. You can find this tool...

The latest version of LogicLoader is always marked by (current) on the downloads page. To see all available versions, click on the (+) next to the file name. The version marked (current) is the latest LogicLoader release for your SOM.

The build.sh file must use Unix end of line terminations. Change the line endings to Unix by using "dos2unix" preceeding the build.sh command. For example...

The images we provide on the web do not properly display Windows dialog boxes for landscape and widescreen PSP-style 480x272 resolution displays. The web images use...